ICX098AL |
RFQ for ICX098AL Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| ICX098AL | - | CCD | N/A |
The ICX098AL is a diagonal 4.5mm (Type 1/4) interline CCD solid-state image sensor with a square pixel array which supports VGA format. Progressive scan allows all pixels signals to be output independently within approximately 1/30 second. Also, the adoption of monitoring mode supports 60 frame/s. This chip features an electronic shutter with variable charge-storage time which makes it possible to realize full-frame still image without a mechanical shutter. Further, high sensitivity and low dark current are achieved through the adoption of HAD (Hole- Accumulation Diode) sensors.
This chip is suitable for applications such as seconddimensional bar-code reader, PC input cameras, etc.
Features |
| • Progressive scan allows individual readout of the image signals from all pixels.• High horizontal and vertical resolution (both approx. 480TV-lines) still image without a mechanical shutter.• Supports monitoring mode• Square pixel• Supports VGA format• Horizontal drive frequency: 12.27MHz• No voltage adjustments (reset gate and substrate bias are not adjusted.)• High resolution, high sensitivity, low dark current• Continuous variable-speed shutter• Low smear• Excellent antiblooming characteristics• Horizontal register: 3.3V drive• 14-pin high precision plastic package (enables dual-surface standard) |
|
Item |
Ratings | Unit | Remarks | |
| Against φSUB | VDD, VOUT, φRG – φSUB | –40 to +10 | V | |
| Vφ2A, Vφ2B – φSUB | –50 to +15 | V | ||
| Vφ1, Vφ3, VL –φSUB | –50 to +0.3 | V | ||
| Hφ1, Vφ2, GND – φSUB | –40 to +0.3 | V | ||
| CSUB – φSUB | –25 to | V | ||
| Against GND | VDD, VOUT, φRG, CSUB – GND | –0.3 to +18 | V | |
| Vφ1, Vφ2A, Vφ2B, Vφ3 – GND | –10 to +18 | V | ||
| Hφ1, Hφ2 – GND | –10 to +5 | V | ||
| Against VL | Vφ2A, Vφ2B – VL | –0.3 to +28 | V | |
| Vφ1, Vφ3, Hφ1, Hφ2, GND – VL | –0.3 to +15 | V | ||
| Between input clock pins |
Voltage difference between vertical clock input pins | to +15 | V | *2 |
| Hφ1 – Hφ2 | –5 to +5 | V | ||
| Hφ1, Hφ2 – Vφ4 | –13 to +13 | V | ||
Storage temperatu
SupplierPost a Buying LeadPDF / DatasheetRelated PDFRelated Models | ||||
